Scooterotica

starreem

Muppet wrote:1 and a 1/8 from where?

From your TDC mark on your magflange

starreem

I found this helpful:

http://www.kawtriple.com/mraxl/carb/plugchop.htm

starreem

I think the mating surface of your case and mag-flange will have a bearing on if you need a gasket or not. I ran into a lot of problems getting a Spanish 200cc engine case to seal up at the mag flange, due to the matching face machined with concentric groves. The face on the flange was smooth. Never...

starreem

Thanks for the advice. I eventually did find a diagram in english from smellofdeath too. I'm running way rich with the AF recommended settings, and the only thing way off was the idle circuit.

starreem

Hello- I've fitted an RB25 kit to a Jet200 engine, using the specs provided in the kit by AF. I've purchased the recommended VHSB-34LD carb (used) but its missing a few parts. Few people on this side of the pond have used these carbs, so I'm having trouble getting answers. I've gotten on well with t...

starreem

All mine do that. I attributed that to the off center spark-plug location in the head. One side is sitting just next to the squish band, and the other is facing the combustion chamber.

starreem

I run a Casa 185 kit with a KBA (clubman clone), PHBL24 and no airbox, just a unifilter pod on the end of a GP bellows. Pulls like a freight train and runs cool as a cucumber at WOT all day long. Running SX150 gear box with 18/47 sprockets, 4.8 final drive.

starreem

Most inexpensive clicker type torque wrenches are not so precise at the lower end of their range. Sometimes up to 20% of the lower end is inaccurate.

starreem

Your revs will go down, not up spraying starter fuel or whatever, when you find your airleak.

starreem

Pick up an old-fashioned beam style:

http://www.petracycles.co.uk/product_in ... e=googleus

Have no idea about this shop, just googled for the image.

Search found 25 matches

Re: TDC the measuring of.

Re: Plug Colour how long to show on new plug

Re: mag flange gasket, is it needed

Re: RB25 kit and carb issues

RB25 kit and carb issues

Re: Plug check please..

Re: Li185 carb and gears question

Re: Question: Torque settings

Re: Tracking down an air leak

Re: left hand torque wrench for flywheel nut

Login • Register

Advertising