The Italian Remade hubs are the one with push in studs MEC???
the push in stud is a smaller diameter than the conventional M10 x 1.00 L /H thread, so the hub can be drilled and tapped to take a SIP stud
Search found 20 matches
- Fri Feb 22, 2013 4:47 pm
- Forum: Lambretta Tech
- Topic: Rear hub and SIP rims
- Replies: 21
- Views: 9607
- Fri Feb 22, 2013 11:15 am
- Forum: Lambretta Tech
- Topic: Catastrophic Engine Failure - What Are my options?
- Replies: 47
- Views: 15793
Re: Catastrophic Engine Failure - What Are my options?
Yep, Yam 110 RD rod,Indian webs, tight crankpin,welded if desired, They,ve served me well since the 1990`s never had a rod or big end failure and thats on some 25plus HP engines. you live and learn with Lammies all the time. Hail Frank
- Wed Mar 07, 2012 10:06 pm
- Forum: Lambretta Tech
- Topic: Exhaust rant!
- Replies: 39
- Views: 15549
Re: Exhaust rant!
lol I wonder who's dirty work your doing. Id rather come across as argumentative than a brown nose LOL! Eden, you crack me up,your wasted on a forum like this, you should be up on stage cracking cheap jokes,I bet you could have an argument with a mirror. Lets just clear some facts up shall we, 1, I...
- Wed Mar 07, 2012 5:37 pm
- Forum: Lambretta Tech
- Topic: Exhaust rant!
- Replies: 39
- Views: 15549
Re: Exhaust rant!
why not ? he knocks a famous Scooter company through his personal vendetta against them?soosh wrote:Dont knock a guy if all he does is say it how it is.Killkenny wrote:Eden- Why do you come across as an argumentative saddo?
- Wed Mar 07, 2012 4:38 pm
- Forum: Lambretta Tech
- Topic: Exhaust rant!
- Replies: 39
- Views: 15549
Re: Exhaust rant!
Eden- Why do you come across as an argumentative saddo?
- Sun Mar 04, 2012 10:26 pm
- Forum: Lambretta Tech
- Topic: lambretta drops
- Replies: 6
- Views: 4977
Re: lambretta drops
Hi Bertie, think of what your looking for in your head, then make some one off handlebars, its easy, just get a handlebar mount for the forks (MB) and check some breakers/ebay etc for some dropped 22mm M/C bars, then you just need to sort gearchange and throttle (Doherty Q/A or BGM)- all available n...
- Thu May 12, 2011 8:34 pm
- Forum: Carburettor Set-ups
- Topic: Ballpark jetting for a 25mm Dellorto
- Replies: 5
- Views: 2951
Re: Ballpark jetting for a 25mm Dellorto
well this is what Id use on a 25 Phbl (presuming the airbox has been drilled to let more air in) on a standard with clubman for a good starting point 98-100 main 48 idle Dq 262 atomiser D22 second clip from top air mix screw 1+ half turns out 40 slide 2.5 needle valve should get you something like n...
- Thu May 12, 2011 8:12 pm
- Forum: Carburettor Set-ups
- Topic: Ballpark jetting for a 25mm Dellorto
- Replies: 5
- Views: 2951
Re: Ballpark jetting for a 25mm Dellorto
open bellmouth of filtered? Air box? remote? need more info fella.
- Thu May 12, 2011 8:01 pm
- Forum: Carburettor Set-ups
- Topic: Help with final carb set up.
- Replies: 1
- Views: 1872
Re: Help with final carb set up.
I think if you just change for the weaker AV 264 atomiser this will sort your problem out- and run it with the X7 second clip from the top
should be bang on the money, Oh and probably up the main to a 125
should be bang on the money, Oh and probably up the main to a 125
- Fri Oct 01, 2010 3:25 pm
- Forum: Lambretta Tech
- Topic: tubless and whitewall?
- Replies: 2
- Views: 1740
Re: tubless and whitewall?
tubless rims? are these a new invention!! Schwalbe whitewall weathermans 3.50 x 10 are the ones to go for chap