Hi i am running Muggy 186,delly 26phbh ,engine runs nice ,but when shutting down from a run it wont return to idle instantly ,takes a few moments to come down to idle ,could it be a weak slide,any idea's please???.
Thanks all
Ian. :fb:
wont idle off clean.
-
idc1967iow
- registered user
- Posts: 58
- Joined: Wed Sep 02, 2009 7:18 pm
- Contact:
- Andy Pickering
- registered user
- Posts: 2172
- Joined: Sun Jan 25, 2009 10:15 pm
- Main scooter: GP
- Location: Hull
- Contact:
Do you mean it runs high revs before settling ? If so it could be an air leak, check plug colour to ensure its not running lean, check all studs are tight and if your running rubber sleeve on your carb check for any splits..
Sent from my GT-I9000 using Tapatalk 2
Sent from my GT-I9000 using Tapatalk 2
Ricspeed, gone but never forgotten RIP my friend #59
-
idc1967iow
- registered user
- Posts: 58
- Joined: Wed Sep 02, 2009 7:18 pm
- Contact:
Checked all the joints all seem ok,plug light tan colour
- Andy Pickering
- registered user
- Posts: 2172
- Joined: Sun Jan 25, 2009 10:15 pm
- Main scooter: GP
- Location: Hull
- Contact:
Milk chocolate light or milky bar lightidc1967iow wrote:Checked all the joints all seem ok,plug light tan colour
Sent from my GT-I9000 using Tapatalk 2
Ricspeed, gone but never forgotten RIP my friend #59
-
idc1967iow
- registered user
- Posts: 58
- Joined: Wed Sep 02, 2009 7:18 pm
- Contact:
Milk choc
-
Darrell Taylor
- Dealer
- Posts: 752
- Joined: Wed Apr 06, 2011 8:43 am
- Main scooter: LAMBRETTA
- Location: Doncaster
- Contact:
try a bigger pilot jet up 1 or 2 sizes or start by adjusting the mixture screw setting it to a richer position the tickover will probably need turning up at same time ,check the carb isnt touching down onto anything causing vibration of the carb ,i presume its a rubber mounted carb
feel free to use this link to contact me on facebook and like it(if u like it)
https://www.facebook.com/pages/Taylor-T ... 8819767924
https://www.facebook.com/pages/Taylor-T ... 8819767924
-
idc1967iow
- registered user
- Posts: 58
- Joined: Wed Sep 02, 2009 7:18 pm
- Contact:
Cheers for reply's,yes rubber mounted,will try the pilot jet :fb:
