Scooterotica

biddy

No Adam not going shipton too much going on over here at the moment next one will be malton af thing . Guinea and hickey are going

biddy

Hi I was running a rt230 bgm exhaust ,30 del, 121 main ,pilot 58 ,x7,av266 now the problem is after putting an reedvalve on it now and was wondering what I up jet to running same set up now but a 140 main .hear some where you go up 20% on main jet would this be right
Many thanks of help

biddy

check pilot jet hasn't come lose ,had the same problem done everything but check carb

biddy

I know the lad who build the bike he come from cork Ireland it's the back light the whole bike was hand build he started at the grill and shaped the seat and tank around the grill ,the front forks are the back swinging arm off some motor bike ,work of art

biddy

Hi is there anyone running a rt 230 reedvalve ,lookin for some help on the carb setup ball park .30mm del ,bgm big bore
Cheers for any help

biddy

I saw beedspeed do a m8 step down to m7 in other words tap out to m8 has one used these before any good

biddy

The studs are m7 /28mm should the helicoil not be m7

biddy

Hi I have a couple of end plate studs rung is there anything other then wielding and taping again any advice would be greatful

biddy

cheers jonnyb for the rely will give that go
cheers

biddy

help me can't get my head around setting up carb on my muggello 200 running on a 30mm phbh main 107 pilot 50 atomizer av266 starter jet 60 needle x7 2nd top and slide 50 and 42mm ancillotti on a tv200 gear box me thinks may is part of the problem :wtf: so if any of you kind gents can help you have a...

Search found 25 matches

Re: carb setup for rt230 reedvalve

carb setup for rt230 reedvalve

Re: Spluttered. Won't rev

Re: nice detail

carb setup for rt230

Re: End plate problem

Re: End plate problem

End plate problem

Re: muggy carb help

muggy carb help

Login • Register

Advertising