End plate problem
Hi I have a couple of end plate studs rung is there anything other then wielding and taping again any advice would be greatful
Got mine helicoiled, think £20 for 3, you can buy the kit to do it yourself but it's about £35, I've M6 kit, great job.
The studs are m7 /28mm should the helicoil not be m7
-
sean brady scooters
- Dealer
- Posts: 2040
- Joined: Mon Jan 05, 2009 12:09 pm
- Location: Ripon, North Yorkshire
- Contact:
"Time -serts "are far better 
Sean Brady Scooters - 01765 690 698
Like Sean said.
If you want a thread repair thats as strong as stuffing the hole with chewing gum and then winding a stud in, use a helicoil.
If you want a thread repair thats as strong as stuffing the hole with chewing gum and then winding a stud in, use a helicoil.
I saw beedspeed do a m8 step down to m7 in other words tap out to m8 has one used these before any good
yup much better !sean brady scooters wrote:"Time -serts "are far better