60mm crank

[RAP 200]

When fitting a 60 stroke crank does ignition timing change;ie,iff timing is set at 18 deg btdc with a 58 stroke and then a 60mm stroke crank is used does stator stay in the same place, and do you still get 18 deg.

[shocky]

if its a new crank id say check the timing in thery the keyway should be iin the same place in relation to the crank at top dead center are you running a 1mm packer

[squeakmillward]

no it doesnt change

[corrado]

So, theorectically, is the woodruff key slot always in the exact same place on various cranks?

[jason frost]

When you change any part( crank, piston, flywheel, stator) timing should be checked.