Jetex Jets

[kejj]

Hi all.
I'm looking to upgrade my jetex sh22 SOI-100 with some decent del'orto jets.
Problem is that I can only make out the small jet that's a 50.
The other 2 I cant make the figures out. The choke jet just has a 1 on it and the mainjet seems very long and only says 5.

My engine is a SIL GP200, I have a scootrs stainless steel exhaust.
What are the standard recommended jet sizes for this setup? Which equivalent Del'orto Jets match this carb?

Best
/K

[bristolmod]

main jet 123
Pilot 45
starter 50
Atomiser 5899/2
slide 7895/1

Chris

[kejj]

main jet 123
Pilot 45
starter 50
Atomiser 5899/2
slide 7895/1

Chris

And the Delorto parts for hte SH2 carb fits and are interchangeable?

[bristolmod]

jets and atomiser certainly are. The slide should be although I've never had the need to substitute one

Chris

[kejj]

jets and atomiser certainly are. The slide should be although I've never had the need to substitute one

Chris

GReat thanks, dunno why I should change the slide though. Got any reason for the suggestion?

[Special X]

Just change the jets, standard main is 118 but 123 sounds good with ScootRS pipe.

[Doom Patrol]

I'd really advise you not to change the slide. In my experience you can't mix and match slides or it will run poorly.

[kejj]

I'd really advise you not to change the slide. In my experience you can't mix and match slides or it will run poorly.

Cool, thanks 4 the tip.