standard ts port timings

[fred]

Anyone know what standard ts 225 port timings are?
thanks,fred

[ArKaTxU]

Anyone know what standard ts 225 port timings are?
thanks,fred

Maybe this can help you. Is from ScooterCenter:

[jason frost]

Anyone know what standard ts 225 port timings are?
thanks,fred

dont tell me you are going TS

[fred]

no chance!!, Just measured a mates and it's 132 transfers,and 188 exhaust :freak:
not messed with,but i thought standard exhaust timing like that a bit extreme.
hows it goin?
fred

[fred]

thanks for the port map,but i used a degree disc,umpteen times!! And still came to the same conclusion. It's got 1mm deck clearance,so doubtfull its a 60 stroke crank. just found it odd. sounds like a crosser,even with a standard indian flywheel.

[camel]

those transfers are rather high,mines about 127...has it got a thick base gasket or packer?may be std but if someone has jacked the barrel up your timings are going to be more like what you have,could poss be your casing too

[jason frost]

no chance!!, Just measured a mates and it's 132 transfers,and 188 exhaust :freak:
not messed with,but i thought standard exhaust timing like that a bit extreme.
hows it goin?
fred

All going well, we need to sort a night out
Sounds about right, all to high try them in the port timing thing Eden did.

[Wayne Miller]

Anyone know what standard ts 225 port timings are?
thanks,fred

Maybe this can help you. Is from ScooterCenter:

Using the port Map above I get . . . . . .

Deck Height -1 (58mm stroke 107mm conrod)
Ex 180.02
Tr 127.26

Deck Height 0 (58mm stroke 107mm conrod)
Ex 176.05
Tr 122.57

Deck Height +1 (58mm stroke 107mm conrod)
Ex 172.03
Tr 117.26

Or 60mm stroke . . . . .

Deck Height -1 (60mm stroke 107mm conrod)
Ex 184.90
Tr 135.62

Deck Height 0 (60mm stroke 107mm conrod)
Ex 181.11
Tr 130.91

Deck Height +1 (60mm stroke 107mm conrod)
Ex 177.28
Tr 126.06