Jet 200 Dampers

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
User avatar
Bones
registered user
Posts: 56
Joined: Thu Jan 14, 2010 9:11 am
Contact:

Does anyone out there know if anyone is doing repro Jet 200 Dampers (9mm eye holes) OR does anyone know of any replacement dampers that fit?

I have tried Paoli dampers of an Italjet with custom spacers but they are way to hard and don't damp at all!

Any ideas would be welcome!
Fruitjuice
registered user
Posts: 201
Joined: Fri Jan 09, 2009 8:26 pm
Location: Ghent, Belgium
Contact:

There's a type of Mini-front dampers that seem to fit perfectly, there was a picture of a Lammy Lynx/Lince with them fitted some time ago.
Life shouldn't be a journey to the grave with the intention of arriving safely in a pretty, well preserved body, but rather to skid in broadside, in a cloud of smoke, thoroughly used up, totally worn out, loudly proclaiming: "WOW, WHAT A RIDE"
mark
registered user
Posts: 1547
Joined: Sat Jan 10, 2009 10:41 am
Contact:

they may fit but they dampen both ways not one way
shocky
registered user
Posts: 2139
Joined: Wed Jan 07, 2009 12:33 pm
Location: cheltenham
Contact:

im sure buzz solo moto does them as a remade item made in the EU as well
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm
User avatar
soulsurfer
registered user
Posts: 2539
Joined: Thu Jan 08, 2009 2:43 pm
Location: The Garden Of England
Contact:

Turn On, Tune In, Cop out!
mark
registered user
Posts: 1547
Joined: Sat Jan 10, 2009 10:41 am
Contact:

can you turn the damping off one way on these mike or just decrease it?
User avatar
soulsurfer
registered user
Posts: 2539
Joined: Thu Jan 08, 2009 2:43 pm
Location: The Garden Of England
Contact:

I really don't know Mark, I've not tried them, just read what it says in the description. Personally, I like the BGM dampers.
Turn On, Tune In, Cop out!
User avatar
Bones
registered user
Posts: 56
Joined: Thu Jan 14, 2010 9:11 am
Contact:

BGM dampers
looking at these they appear to have standard 6mm eye ends which means they will not fit the 9mm Jet200 studs
shocky
registered user
Posts: 2139
Joined: Wed Jan 07, 2009 12:33 pm
Location: cheltenham
Contact:

Bones wrote:
BGM dampers
looking at these they appear to have standard 6mm eye ends which means they will not fit the 9mm Jet200 studs
its only a push in insert they come out easily which is good and err bad
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm
User avatar
panamesc
registered user
Posts: 50
Joined: Sun Jan 11, 2009 9:07 am
Location: perpignan , south of france !!
Contact:

mark wrote:they may fit but they dampen both ways not one way
like any modern damper ;)
i'm the one with the red and black spax
absolutely no problems , set them soft , ride like a ...... lambretta :mrgreen:
it's even p'n'p 8-)
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 14 guests