Mikuni+ Taffspeed TS1 225

[bendikb]

Hi

I could not find this combo in any other post. Please feel free to point me in the correct direction If I missed a post.
Set up;
Mikuni carb
Tasserini reed
TS1 225 w/ Taffspeed road tune
MBD piston
Taffspeed road exhaust
HPC crank w jap rod conversion
Af flywheel with Indian stator so no variable ignition as for now..

Any ideas on where to start?

[bendikb]

Nobody? There ought to be somebody out there with a similar TS1 and TMX 35?

[drunkmunkey6969]

Try searching here first, there are a few setups you can compare: http://scooterotica.org/forum/viewtopic ... 14&start=0

Also, your second post now states it is a 35mm so people can at least make some suggestions, you'll probably find that a good starting point is something like this:

Standard slide, 56 needle, 2nd clip, 320 main, 20 pilot.....start there and lean/richen up as your setup requires according to plug chops. If happy then crack on, if you want a more precise setting and/or peace of mind, then get it booked in at your local scooter dyno specialist.

[bendikb]

Thanks! I'll use that as a starting point. I can assure that my local sooter shop does not have a dyno