knocking noise on scoot rs anti dive

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
User avatar
soulsurfer
registered user
Posts: 2539
Joined: Thu Jan 08, 2009 2:43 pm
Location: The Garden Of England
Contact:

Steve, that's not the case with anti dive, that lug isn't used. I'm using disc links, if using drum links, the lug on the link has to be removed so the caliper plate can rotate. It's then held by the tie bar to the fork leg and the assembly then pivots on the spindle and tie bar like a parallelogram within suspension travel.
Turn On, Tune In, Cop out!
red ghost
registered user
Posts: 545
Joined: Wed Jan 07, 2009 7:46 pm
Xbox live gamer tag: Pleasure Master
Main scooter: lambretta gp150
Location: Gold Coast Queensland Australia
Contact:

soulsurfer wrote:Image
Image

Is this the Worb5 unit?
How come phonetics isn't spelt with an 'f'?

Check out my boobs! <-- <--Just imagine being burried between those puppies!
User avatar
sean brady scooters
Dealer
Posts: 2040
Joined: Mon Jan 05, 2009 12:09 pm
Location: Ripon, North Yorkshire
Contact:

one thing to watch out for,is spindle nuts (especially domed or pike ones) hitting shockers..
Sean Brady Scooters - 01765 690 698
sydduckett
registered user
Posts: 1900
Joined: Wed Jan 14, 2009 12:21 am
Contact:

Gaz, i told you that by buying of Randle and saving a few pence you would be looking at a false ecconomey....:) Now Ill tell you again stop buying ting tong rubbish.

By the by if you wanna pop over and pick up the end can tonight no worries, swapped some rings with JB for a 2nd hand one yesterday and fits like a glove.... :D
shocky
registered user
Posts: 2139
Joined: Wed Jan 07, 2009 12:33 pm
Location: cheltenham
Contact:

soulsurfer wrote:Steve, that's not the case with anti dive, that lug isn't used. I'm using disc links, if using drum links, the lug on the link has to be removed so the caliper plate can rotate. It's then held by the tie bar to the fork leg and the assembly then pivots on the spindle and tie bar like a parallelogram within suspension travel.
ok i understand cheers for putting me right i dont have any knowledge of these brakes but that makes sense as that will allow both sides of the hub to move slightly when the brake is applied
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm
User avatar
soulsurfer
registered user
Posts: 2539
Joined: Thu Jan 08, 2009 2:43 pm
Location: The Garden Of England
Contact:

red ghost wrote:Is this the Worb5 unit?
Yes. Not cheap but superb solution with quality and looks IMO.
Turn On, Tune In, Cop out!
red ghost
registered user
Posts: 545
Joined: Wed Jan 07, 2009 7:46 pm
Xbox live gamer tag: Pleasure Master
Main scooter: lambretta gp150
Location: Gold Coast Queensland Australia
Contact:

soulsurfer wrote:
red ghost wrote:Is this the Worb5 unit?
Yes. Not cheap but superb solution with quality and looks IMO.

What worries me is how does a 'Dirty Sanchez' fit into it?
How come phonetics isn't spelt with an 'f'?

Check out my boobs! <-- <--Just imagine being burried between those puppies!
User avatar
soulsurfer
registered user
Posts: 2539
Joined: Thu Jan 08, 2009 2:43 pm
Location: The Garden Of England
Contact:

God knows :-? I did ask if I could have it without the engraving :roll:
Turn On, Tune In, Cop out!
sydduckett
registered user
Posts: 1900
Joined: Wed Jan 14, 2009 12:21 am
Contact:

How much is the worb anti dive and will it bolt staright on to a scootrs set up?
User avatar
soulsurfer
registered user
Posts: 2539
Joined: Thu Jan 08, 2009 2:43 pm
Location: The Garden Of England
Contact:

sydduckett wrote:How much is the worb anti dive and will it bolt staright on to a scootrs set up?
It's a complete kit that requires some donor parts, it's not an upgrade kit and isn't compatable with any other brake setup except maybe some parts of the LTH brakes.
Image
The SIP caliper additional.
Turn On, Tune In, Cop out!
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Google [Bot] and 10 guests