25mil carb set up advise plz
-
- registered user
- Posts: 210
- Joined: Mon Apr 19, 2010 9:21 pm
- Main scooter: lambretta TV200
- Location: belfast, NI
- Contact:
looking sum advise on carb set up its a gp 200 stage 4 top end jl3 exhaust 25mil delly rubber mounted with remote filter engine internals are all tv200 the advice i got the other day was to use a d29 needle an aq264 atomiser and was given 3 main jets an 88 / 92 /95 clearly it didnt run rite so i put the aq266 back in with the 95 main its ten times better have orderd n aq268 an sum new jets rranging from 98 to 110 so any help on this wud be great thanks everyone
Last edited by Danger on Tue Apr 20, 2010 9:28 pm, edited 1 time in total.
I put one on with an AQ268 and D22 needle and a 105 main can't remember needle position
Or pilot jet But it might have been a 55. this was with a Taffy pipe and a filer through the air box.
Not quite the same set up, but I thought it might help.
Or pilot jet But it might have been a 55. this was with a Taffy pipe and a filer through the air box.
Not quite the same set up, but I thought it might help.