smallblock kit
try harry barlow at pro porting http://www.proporting.com/ beware he can talk for hoursSuede Ed wrote:struggling to get a decent budget smallblock kit,I can go to about £200. phoned round a few dealers, no one has a st4 iron 175 kit. any ideas?
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm
buy an indian GP150 barrel, an ASSO 175 PISTON , get it bored out and tuned to a proper stage four. you"ll have change from 200 easily. or ask on the web for a 175 kit someone has taken off to upgrade. cast 175 kits are topper if fetled right. decent carb and pipe , and itll gan canny. 
-
squeakmillward
- registered user
- Posts: 39
- Joined: Wed Jan 21, 2009 1:39 pm
- Contact:
buzzsolomotto 185 kit @ £135 clearance checked ,inlet studs reworked ,cylinder head reworked just bolt on
add manifold @ £10 jetex 22mm carb @ £30 and a 125 jet @ £5
remove baffle from air scoop and air box and enjoy
add manifold @ £10 jetex 22mm carb @ £30 and a 125 jet @ £5
remove baffle from air scoop and air box and enjoy
- Special X
- registered user
- Posts: 407
- Joined: Wed Jan 07, 2009 9:38 am
- Main scooter: Lambretta 125 special 230cc
- Location: Wakefield
- Contact:
Porting would need sorting as the liner is usually offset on these. Would work well after a session with Harry Barlow but very dissapointing as STD. The Rayspeed kit would be better.squeakmillward wrote:buzzsolomotto 185 kit @ £135 clearance checked ,inlet studs reworked ,cylinder head reworked just bolt on![]()
add manifold @ £10 jetex 22mm carb @ £30 and a 125 jet @ £5
remove baffle from air scoop and air box and enjoy
i belive HB does these kits already sorted ,thats the reason i said ring him couse he can offer several options from 175-190Special X wrote:Porting would need sorting as the liner is usually offset on these. Would work well after a session with Harry Barlow but very dissapointing as STD. The Rayspeed kit would be better.squeakmillward wrote:buzzsolomotto 185 kit @ £135 clearance checked ,inlet studs reworked ,cylinder head reworked just bolt on![]()
add manifold @ £10 jetex 22mm carb @ £30 and a 125 jet @ £5
remove baffle from air scoop and air box and enjoy
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm
-
squeakmillward
- registered user
- Posts: 39
- Joined: Wed Jan 21, 2009 1:39 pm
- Contact:
buzz has them sorted too @ £135corrado wrote:That's the route I'd choose.shocky wrote: I belive HB does these kits already sorted ,thats the reason I said ring him as he can offer several options from 175-190
are they ported and polished for that when i say ported its only tidying really are the transferes the same height and the liner matched to the ally outer with a nice shape to the inlet and outlet harrys are i know he charges more for this service but there fully sorted and he will give instructions on jets and timing i know buzz does a good job as wellsqueakmillward wrote:buzz has them sorted too @ £135corrado wrote:That's the route I'd choose.shocky wrote: I belive HB does these kits already sorted ,thats the reason I said ring him as he can offer several options from 175-190
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm
