smallblock kit

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
User avatar
Suede Ed
registered user
Posts: 221
Joined: Tue Jan 13, 2009 2:01 pm
Main scooter: SIL GP200
Location: Black Country
Contact:

struggling to get a decent budget smallblock kit,I can go to about £200. phoned round a few dealers, no one has a st4 iron 175 kit. any ideas?
shocky
registered user
Posts: 2139
Joined: Wed Jan 07, 2009 12:33 pm
Location: cheltenham
Contact:

Suede Ed wrote:struggling to get a decent budget smallblock kit,I can go to about £200. phoned round a few dealers, no one has a st4 iron 175 kit. any ideas?
try harry barlow at pro porting http://www.proporting.com/ beware he can talk for hours
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm
goldeneye
registered user
Posts: 1038
Joined: Wed Apr 01, 2009 2:28 pm
Contact:

buy an indian GP150 barrel, an ASSO 175 PISTON , get it bored out and tuned to a proper stage four. you"ll have change from 200 easily. or ask on the web for a 175 kit someone has taken off to upgrade. cast 175 kits are topper if fetled right. decent carb and pipe , and itll gan canny. 8-)
User avatar
corrado
Dealer
Posts: 2588
Joined: Thu Jan 08, 2009 1:12 am
Main scooter: Lambretta GP
Location: Top of Blackpool Tower
Contact:

Have you tried Rayspeed, their 175 ally kit is well finished?
squeakmillward
registered user
Posts: 39
Joined: Wed Jan 21, 2009 1:39 pm
Contact:

buzzsolomotto 185 kit @ £135 clearance checked ,inlet studs reworked ,cylinder head reworked just bolt on :lol:
add manifold @ £10 jetex 22mm carb @ £30 and a 125 jet @ £5
remove baffle from air scoop and air box and enjoy :lol:
User avatar
Special X
registered user
Posts: 407
Joined: Wed Jan 07, 2009 9:38 am
Main scooter: Lambretta 125 special 230cc
Location: Wakefield
Contact:

squeakmillward wrote:buzzsolomotto 185 kit @ £135 clearance checked ,inlet studs reworked ,cylinder head reworked just bolt on :lol:
add manifold @ £10 jetex 22mm carb @ £30 and a 125 jet @ £5
remove baffle from air scoop and air box and enjoy :lol:
Porting would need sorting as the liner is usually offset on these. Would work well after a session with Harry Barlow but very dissapointing as STD. The Rayspeed kit would be better.
shocky
registered user
Posts: 2139
Joined: Wed Jan 07, 2009 12:33 pm
Location: cheltenham
Contact:

Special X wrote:
squeakmillward wrote:buzzsolomotto 185 kit @ £135 clearance checked ,inlet studs reworked ,cylinder head reworked just bolt on :lol:
add manifold @ £10 jetex 22mm carb @ £30 and a 125 jet @ £5
remove baffle from air scoop and air box and enjoy :lol:
Porting would need sorting as the liner is usually offset on these. Would work well after a session with Harry Barlow but very dissapointing as STD. The Rayspeed kit would be better.
i belive HB does these kits already sorted ,thats the reason i said ring him couse he can offer several options from 175-190
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm
User avatar
corrado
Dealer
Posts: 2588
Joined: Thu Jan 08, 2009 1:12 am
Main scooter: Lambretta GP
Location: Top of Blackpool Tower
Contact:

shocky wrote: I belive HB does these kits already sorted ,thats the reason I said ring him as he can offer several options from 175-190
That's the route I'd choose.
squeakmillward
registered user
Posts: 39
Joined: Wed Jan 21, 2009 1:39 pm
Contact:

corrado wrote:
shocky wrote: I belive HB does these kits already sorted ,thats the reason I said ring him as he can offer several options from 175-190
That's the route I'd choose.
buzz has them sorted too @ £135
shocky
registered user
Posts: 2139
Joined: Wed Jan 07, 2009 12:33 pm
Location: cheltenham
Contact:

squeakmillward wrote:
corrado wrote:
shocky wrote: I belive HB does these kits already sorted ,thats the reason I said ring him as he can offer several options from 175-190
That's the route I'd choose.
buzz has them sorted too @ £135
are they ported and polished for that when i say ported its only tidying really are the transferes the same height and the liner matched to the ally outer with a nice shape to the inlet and outlet harrys are i know he charges more for this service but there fully sorted and he will give instructions on jets and timing i know buzz does a good job as well
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Ahrefs [Bot], Google [Bot] and 8 guests

cron