Copper Sandwich Exhaust Gaskets

[soulsurfer]

Rumaging through my bits and pieces I came across a couple of copper sandwich type TS1 exhaust gaskets, are these worth using or should I cast them aside?

[corrado]

I'd use them but I wouldn't 're-use' them.

[leigh]

these are the only ones i personally like, and agree would only use once

Leigh

[YAMLAM]

does any body do a solid copper one,i still use( for standard exhaust ) one i got from webbo (MSC ) back in the 80`s,just heat it up with a blowtorch untill it`s cherry red then dunk it in water.

[goldeneye]

Rumaging through my bits and pieces I came across a couple of copper sandwich type TS1 exhaust gaskets, are these worth using or should I cast them aside?

use gilera runner exhaust gaskets, same and cheaper. once you mention TS1 on the fone , the till starts ringing faster at most dealers.

[corrado]

use gilera runner exhaust gaskets, same and cheaper. once you mention TS1 on the fone , the till starts ringing faster at most dealers.

TS1 gaskets are about £1.40, just googled Gilera runner exhaust gaskets, 1st two I looked at were £3.39 and £1.96, so I'll agree to disagree with you.

[goldeneye]

your not a dealer are you by any chance...............

[corrado]

Yes, so point me in the direction of the 50p Gilera gaskets.

[goldeneye]

back of the net! is that a bite?

[Booby]

Could be a bit rough on the old teeth