i have no key for the steering lock on the jet, how easy are they to remove and replace?
any recomendations on where to buy a replacement from?
steering lock removal / replacement
Small locating screw inside of headset, remove and the lock will come out. as for replacement most dealers would have i should imagine.
Leigh
Leigh
- rog60
- registered user
- Posts: 588
- Joined: Fri Feb 13, 2009 7:18 pm
- Main scooter: Indian GP200
- Location: SWINDON (Wilts)
- Contact:
Also lock tongue is located under a small round alloy blanking plate which needs to be prised out. When the lock mecanism is being removed, there will be a small spring and plunger underneath. Remove carefully as can fall down inside the horncast/ legshield gap. Replacements are available often as a complete kit.leigh wrote:Small locating screw inside of headset, remove and the lock will come out. as for replacement most dealers would have i should imagine.
Leigh
NO IT'S NOT A F***IN* MOPED!!!!!!
- corrado
- Dealer
- Posts: 2588
- Joined: Thu Jan 08, 2009 1:12 am
- Main scooter: Lambretta GP
- Location: Top of Blackpool Tower
- Contact:
For S3 / GP Indian ones are about a fiver, Italian about £15. I've got both plus the screw, plunger, spring and cap.
Sometimes they're a barsteward to remove without having a key to use to pull it out.
Sometimes they're a barsteward to remove without having a key to use to pull it out.
thanks for all replys, will have a look tomoro night and see what i can do!
corrado you have pm rearding the lock!
corrado you have pm rearding the lock!
