Crank Cleaning ??

[whonatic]

Following a melted honda piston showering my crank with aluminium......Whats the best way to clean it ?

[monkey boy]

I would remove the crank then clean it with petrol and compressed air
CHEERS AL

[Andy Pickering]

IF you get a realy sharp chisel..and I mean sharp you could remove the obstrution fairly easy matey as the ally wont deep key to the crank as the iron is much harder than the ally..

[tony]

If it were me i'd get it split and checked. If that ally has run in that bearing it will damage it despite being softer.