Found a phbl sized foam filter for restricted room

[Davidsquaredson]

It's for a Briggs and Stratton lawn mower. I have no idea if you can get in the UK, I got it for 20$ on Amazon. Fits snug over the 39mm opening and perfectly under the panel. I did not have to adjust my jetting to my great surprise.

Part # on package.

DD

Sent from my Pixel 2 using Tapatalk

[paul d]

Great post. Most towns here have someone who fixes lawnmowers. It could be a handy fix for anyone on the road who's lost an airfilter.

[gaz_powell]

Pattern versions not genuine B&S £2.50 on ebay!!!

[gaz_powell]

Found them for 99p! Worth a punt

[rosscla]

Guessing it might be flexible enough to fit on a PHBH too if need be?

[gaz_powell]

35mm dia hole in the filter

[YAMLAM]

the cheap one i bought on ebay has a 40mm hole

[rosscla]

That wouldn't be too much is a stretch on the phbh which is 42 mm without the plastic bellmouth

[Warkton Tornado No.1]

Any feedback on these filters from those that were going to get one to try?

Do they work well enough to be non restrictive?

Any issues with hot starting (due to flooding) from fans of the PH range?

[YAMLAM]

Had to cut the corner away a bit on mine ,where the fuel bango /pipe is , i know the hole is slightly larger than my PHBL 25 but stays in place against the panel, doesnt affect the running at all.
be switching to a Mikuni TM24 soon , hopefully it will still fit .