All stock apart from
Pipe when it does start it races all over place and takes ages to fall on to tick over lost count how many times carb as been apart anyone help cheers
T5 running crap
- drunkmunkey6969
- Moderator
- Posts: 2838
- Joined: Sun Jan 04, 2009 1:42 pm
- Main scooter: '69 Lambretta GP
- Location: North Yorkshire
- Contact:
Good advicemick1 wrote:sounds like an air leak.
Maybe worth investing in a leak test kit.
Wouldn't go too far on it till it's sorted.
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
-
- registered user
- Posts: 346
- Joined: Mon Sep 19, 2011 2:03 pm
- Main scooter: t5 172 and a bit more
- Location: tamworth staffs
- Contact:
Its got brand new gaskets and a new fly side oil seal even put head gasket on ..it will fall off the revs after a short time but rev it again and its all revs all over place again
- GTFOMWSC
- registered user
- Posts: 290
- Joined: Sat Jan 01, 2011 5:49 pm
- Main scooter: GP230 Super Monza CS Tuned
- Location: Rugby
- Contact:
maybe an uneven carb body suffice onto the block(worn) had a P2 doing similar it was Diablo who sussed it at about 11pm after a few hours of head scratching.Try another carb body with all your jetting in it it may or may not work
the man don't give a f@@k
-
- registered user
- Posts: 305
- Joined: Thu Jun 30, 2011 10:00 am
- Main scooter: T5 172 Tv 240
- Location: Galway Ireland
- Contact:
Has the gear oil level dropped? Also, sometimes an overtightened carb body can prevent the slide fully returning. A worn throttle cable can stop the slide too resulting in the high revs you describe.