LAMBRETTA DYNO GRAPH POSTING AREA

[SouthamptonSaint]

Old school Suzuki 205 by Chiselspeed.

[tonydevon]

his is the last in 3 runs/setups that were done with my standard mugello kit, tested with 28 and 26mm dellorto carbs

ended up with the 26mm, PM expansion chamber, open carb, 17 degrees fixed timing.

feels very good on the road but desperate to get it tuned/ported later this year as I need more go

the TQ figure in the text at the bottom must be some sort of glitch LOL

[wack 63]

Anyone care to comment on the initial weakness at low revs? Raising the needle and pilot separately made the motor run too rich. Rapido 204.

[drunkmunkey6969]

Did you try a bigger atomiser? What's the full setup?


Sent from my iPhone using Tapatalk

[wack 63]

It's a VHSB 38,55 idle, 160 main but will have to check atomiser and needle/ slide

[Major Hassle]

225 TS1 27Bhp 23ft lbs Torque, cyclone 5, tmx 35 mil, franspeed tourer

[Major Hassle]

225 TS1 27Bhp 23ft lbs Torque, cyclone 5, tmx 35 mil, franspeed super tourer