just Been for a 20 mile run and no slipping slight adjustment needed but we'll pleased Sent from my SM-A320FL using Tapatalk
Rayspeed 6 plate clutch
-
garry inglis
- registered user
- Posts: 1298
- Joined: Tue Jul 21, 2015 8:04 pm
- Main scooter: ts1 230 and rb200
- Location: darlington
- Contact:
just Been for a 20 mile run and no slipping slight adjustment needed but we'll pleased Sent from my SM-A320FL using Tapatalk
-
alanscottj
- registered user
- Posts: 960
- Joined: Fri May 23, 2014 6:54 pm
- Main scooter: Lambretta GP SS250 Casa
- Contact:
Mine took a bit to set up and find 'the sweet spot' but once I found it and it was adjusted just right, perfect 
Lambretta Series 2 Rat - RB260, SuperTourer, Cyclone 5 gearbox 😎👍
-
shamrockexpress
- registered user
- Posts: 330
- Joined: Mon Sep 28, 2009 12:44 am
- Contact:
what about the readspeed 6 plate i was thinking one of these as you can use std plates if you are caught short!!!!!
-
10 inch Terror
- registered user
- Posts: 1447
- Joined: Tue Jun 29, 2010 9:17 pm
- Xbox live gamer tag: No.
- Playstation gamer tag: PLEASE!
- Main scooter: Lambretta LI Imola 185
- Location: Farnborough Hampshire
- Contact:
I found my AF Race excellent but the Road version was awful. I spent hours fettling it to get it to work. It had a horrible feel even with correctly routed quality nylon lined clutch cable. I swapped it out for a BGM Super Strong in the end. There's clutches seem to go under the radar. It's in my RB20 and it's spot on.
-
garry inglis
- registered user
- Posts: 1298
- Joined: Tue Jul 21, 2015 8:04 pm
- Main scooter: ts1 230 and rb200
- Location: darlington
- Contact:
Well if there are no more race clutches it'll have to be bgm or lth 7 plate I think I'll get some spairs just in case
Sent from my SM-A320FL using Tapatalk
Sent from my SM-A320FL using Tapatalk