urgent help required!

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
User avatar
Dazza
Posts: 534
Joined: Wed Jan 07, 2009 8:48 pm
Main scooter: S3 LI Rapido 225
Location: Newark on Trent
Contact:

I took my scoot out tonight , it was running fine - just round the block didn't thrash it at all, i pulled over to faff about with my gps and the engine stopped suddenly and was solid when i tried to kick it, it eventually kicked over but compression was down and it wouldnt start.

pushed the bloody thing home and stripped it down to find the ring/s had snagged on the exhaust port.

The top end is a rapido 225 - i'd like to hear if anyone knows why this could have happened?
I also need to get a new piston and rings tomorrow if possible (i think the barrel has survived) where am i likely to get them from ? I am in Newark,Notts and can travel a reasonable distance to get it - possibly thinking MB?

Any suggestions?
If it aint broke.........tinker with it.....
RinB
Posts: 317
Joined: Mon Jan 05, 2009 1:43 pm
Main scooter: Reflections in Blue
Location: Grimsby
Contact:

Ouch m8

Id ring MBs first He may not keep them.
Beedams in Grimsby keep Rapido on stock ring first though
If its made of Metal Fettle it !!
User avatar
Dazza
Posts: 534
Joined: Wed Jan 07, 2009 8:48 pm
Main scooter: S3 LI Rapido 225
Location: Newark on Trent
Contact:

Cheers Smithy - will try beedies - i'll have to eat my words after spitting my dummy out with them a while ago :oops:

I've just noticed the piston is an escorts piston - any opinions on these?
If it aint broke.........tinker with it.....
User avatar
paulmgreen
registered user
Posts: 517
Joined: Sun Jan 04, 2009 4:34 pm
Main scooter: Lambretta Group 4 Race 200
Location: Grantham
Contact:

Do you definitely nee dtomorrow? How about Rayspeed and get them to courier it for following day delivery?
YouTuve Vlog channel - https://www.youtube.com/channel/UCEhrgL ... vY_4Px2WTg

www.JPPLambretta.co.uk

Sponsors Replay Scooters JPPLambretta
User avatar
Dazza
Posts: 534
Joined: Wed Jan 07, 2009 8:48 pm
Main scooter: S3 LI Rapido 225
Location: Newark on Trent
Contact:

No Paul I was in panic mode :D

I'm hoping to get it sorted ready for Darlo on Saturday so if I get it delivered Thursday I should be fine.
As Smithy said they have them in beedies - interestingly though they have one listed for £37.99 and an asso for £99.99 - i'll bet any money the 37.99 is an escorts version :evil:

I may not be round for that oil by the way - I might not need it now :cry:

Cheers
If it aint broke.........tinker with it.....
User avatar
rog60
registered user
Posts: 588
Joined: Fri Feb 13, 2009 7:18 pm
Main scooter: Indian GP200
Location: SWINDON (Wilts)
Contact:

Dazza wrote:Cheers Smithy - will try beedies - i'll have to eat my words after spitting my dummy out with them a while ago :oops:

I've just noticed the piston is an escorts piston - any opinions on these?
My opinion and thoughts:-

Escorts/ Mahle made in India under licence and I understand that Mahle 'took over' Borgo :?:
I believe most Indian GP engines have Mahle copy pistons fitted and while not the best of items they are OK for general road use but not the No 1 choice on a Rapido :!: :!: :!:

Is it the three cast iron ring version?
NO IT'S NOT A F***IN* MOPED!!!!!!
User avatar
Andy Pickering
registered user
Posts: 2172
Joined: Sun Jan 25, 2009 10:15 pm
Main scooter: GP
Location: Hull
Contact:

Pull a sicky dazza and pick em up by hand..you know youve got em them..could try the swine flu angle..nothing worse then an empending run and a playing up scoot..as I was last week..good luck matey..
Ricspeed, gone but never forgotten RIP my friend #59
User avatar
Dazza
Posts: 534
Joined: Wed Jan 07, 2009 8:48 pm
Main scooter: S3 LI Rapido 225
Location: Newark on Trent
Contact:

Lam46 wrote:Pull a sicky dazza and pick em up by hand..you know youve got em them..could try the swine flu angle..nothing worse then an empending run and a playing up scoot..as I was last week..good luck matey..
I think I may just do that - no need to pull sicky - i'll just pretend I'm somewhere that I'm not :D
If it aint broke.........tinker with it.....
User avatar
Dazza
Posts: 534
Joined: Wed Jan 07, 2009 8:48 pm
Main scooter: S3 LI Rapido 225
Location: Newark on Trent
Contact:

rog60 wrote:
Dazza wrote:Cheers Smithy - will try beedies - i'll have to eat my words after spitting my dummy out with them a while ago :oops:

I've just noticed the piston is an escorts piston - any opinions on these?
My opinion and thoughts:-

Escorts/ Mahle made in India under licence and I understand that Mahle 'took over' Borgo :?:
I believe most Indian GP engines have Mahle copy pistons fitted and while not the best of items they are OK for general road use but not the No 1 choice on a Rapido :!: :!: :!:

Is it the three cast iron ring version?
No its only a 2 ring jobby - but definately an escorts piston which I think is the culprit :cry:
If it aint broke.........tinker with it.....
User avatar
rog60
registered user
Posts: 588
Joined: Fri Feb 13, 2009 7:18 pm
Main scooter: Indian GP200
Location: SWINDON (Wilts)
Contact:

I would think that if it has cast rings then definitely yes.
NO IT'S NOT A F***IN* MOPED!!!!!!
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: Google [Bot], Majestic-12 [Bot], Semrush [Bot] and 7 guests