stage 4 200 and a 60mm stroke!!!!!!!!!!!

[shamrockexpress]

Is this a common set-up?????????mate has removed his ts1 its got a 60mm stroke can he put back his packer and put on the standard stage 4 200 sil set up,,,,,,,,,,,,,,,,,,,,would port timings squish be fine on the 60mm stroke?
thanx in advance
ps this is just a stop gap until his new GT200 kit arrives

[Norrie Bodge]

What thickness packer is it? 1 - 1.5mm ??

Your m8 not selling TS1 kit is he?

[Bofs]

It'll work fine. A 1mm Base packer will cancel out the extra stroke. It would need assembled to check the squish though.

Sent from my D5803 using Tapatalk

[Muppet]

check transfer port height with packer

[Special X]

It would increase the transfer and exhaust timing by aprox 5/6 degrees.

[shamrockexpress]

So an expansion would work better than the clubman????????

[drunkmunkey6969]

Have we finished talking about the 60mm stroke and packer?????????????????????

Moved straight onto,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,exhausts!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

You are going to change the gearing ?!?!?!?!?!?!?!?!?!?!


Sent from my iPhone using Tapatalk

[Mag]

Can I join in?????????????????????

[Muppet]

check transfer heights with packer ask again; a adult mite reply

[shamrockexpress]

Just passing the info onto a mate who asked my advice what would i know, i,m an electrican
will let yous all know how he gets on, first things first renewing his AA membership