lam tv175 series 2

[firekdp]

JIMS that posted on here a few months back with pics of an S2 rectier he'd uprated with a silicon full wave rectifier. It's for use with the 12volt rewire on the stator but it points the way as to what's possible

http://scooterotica.org/forum/viewtopic ... =rectifier

That would be the best way of doing it, bolt in a bridge rectifier in the place of the selenium one but you will only need two wires, as the original was only half wave.

[lammydave]

i have a battery type rectifier off a series 3, you are welcome to it if you want to give it a try.....

[martin123]

thanks i have 3 tv175 2 x series 2 and one series 3 , this is the first of the restorations series 2, the black plastic unit in the first pic i was told is for a 6 pole stator, my 2 series 2 are 4 pole 6 volt , which is the old units with the steel cover ,

[martin123]

ok if i was to do away completly with the old unit i s there a modern type to replace like on of these http://cgi.ebay.co.uk/Regulator-Rectifi ... 7C294%3A30

[lammydave]

my 2 series 2 are 4 pole 6 volt , which is the old units with the steel cover ,

that is the one i have....

[martin123]

ok if its the steel cover type, then yes please ,how much thanks ,do you know if the parts are still av for these original type regulators and rectifiers

[lammydave]

ok if its the steel cover type, then yes please ,how much thanks ,do you know if the parts are still av for these original type regulators and rectifiers

i am not aware of any parts being available for these.....

pm me your address, and i'll post it off to you.....

david

[martin123]

hi i think the one series 3 tv175 i have is a 12 volt,thanks

[martin123]

thanks dave your a top man, anytime you need any machining let me know, cheers