last week I decided to change the disc pads on my TV175S3. So removed the hub; stripped it down; cleaned it; replaced with new pads, and rebuilt it.
Had problems refitting the front hub/ wheel to the links, but eventually got it in- put it down to my advancing years/ failing eyesight. Brakes worked fine but working on the front noticed a slight lean to the N/S.
Today I removed the wheel/ disc and replaced the buffers- same problem getting the unit back into the links.
"Somethings not right" says bristolmod
After a very long think and reference to the original 1962 parts book., I discovered to my absolute horror that I'd fitted the axel the wrong way round (had the "shoulder" on the N/S and the nut on the O/S
)I've gone for a long lie down and am contemplating my scootering future..................
