1964 Li series 3 side panels

General scooter chat, any scooter related non technical info.
Blenks
registered user
Posts: 166
Joined: Thu Feb 26, 2015 1:29 pm
Main scooter: Lambretta S3 Li150
Location: Coventry
Contact:

Just had a look over a 1964 Li125 series 3. It has the chrome ring and the owner has LCGB date validation certificate. I noticed that it had clip on side panels. No handles at the rear of them. It was restored a couple of years ago. I just wondered whether this is something to be suspicious of? I have not come across anything of this year of manufacture with this type of panel.
bristolmod
registered user
Posts: 1741
Joined: Wed Jan 07, 2009 8:42 am
Main scooter: Lambretta TV175 S3- what else!
Location: Bali-Hai bar, Locarno Ballroom Bristol, 1967!- mines a Brown Split!!
Contact:

non handle panels on a '64 Slimstyle are definitely wrong- they didn't come in until 1968 ish.

Consequently it should raise a question as to what else may or may not be wrong on the scooter.

Chris
Scootering since 1968.
User avatar
DigDug
registered user
Posts: 788
Joined: Wed May 02, 2012 1:00 pm
Main scooter: Lambretta
Location: Stroud
Contact:

It's a simple job to fit clip on panels to an early bike.

As it's an Li the only thing I'd be bothered about is that the number is right.
Did you have to do that?
Timbo
registered user
Posts: 1276
Joined: Tue Mar 03, 2009 2:46 pm
Main scooter: SX200 and GP230 RT
Location: Luton area.....
Contact:

The frame number dictates what the scooter is, is it being marketed as original?
Blenks
registered user
Posts: 166
Joined: Thu Feb 26, 2015 1:29 pm
Main scooter: Lambretta S3 Li150
Location: Coventry
Contact:

It is a restored 1964. I have just not seen any others without the handles. I have since seen it advertised by the previous owner as recently as Feb he only advertised it asxa standard Li125 now it is being sold with 175 upgrade. I am always suspicious and do lots if research before making decision and of course seek advise from forum members. Money is too hard to come by to lose on something that is not ad it appears.
wurzel
registered user
Posts: 75
Joined: Tue Mar 26, 2013 10:08 pm
Main scooter: TV 175 / JET 200
Location: north east
Contact:

I'm pretty sure the only clip on Li type panels were on Servetas, but as long as the frame number is correct
the panels could be swapped off and replaced along with the spring clips.
Some people change panels as a personnel preference but the frame number dictates the identity of the scooter
User avatar
DigDug
registered user
Posts: 788
Joined: Wed May 02, 2012 1:00 pm
Main scooter: Lambretta
Location: Stroud
Contact:

wurzel wrote:I'm pretty sure the only clip on Li type panels were on Servetas, but as long as the frame number is correct
the panels could be swapped off and replaced along with the spring clips.
Some people change panels as a personnel preference but the frame number dictates the identity of the scooter
LI4's were clip on panels.
Did you have to do that?
philcasino1973
registered user
Posts: 91
Joined: Mon May 05, 2014 8:57 pm
Main scooter: lambretta gp200
Contact:

ifully restored a 1962 li125 s3 italian import ...i knewthey were wrong but it came with clip on panels
kept them as i loved the clean look ....
doing 2 more and one of them has clip ons on too!!
regards
phil
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 2 guests