Horrendous scraping when kicking over
-
Adam_Winstone
- registered user
- Posts: 1693
- Joined: Tue Jan 31, 2012 8:54 pm
- Main scooter: Lambretta GP
- Contact:
Start stripping it down
This thread makes me wanna drive the 167 miles and have look myself..... sadly im not in burnely till next friday
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm
-
vRSG60
- registered user
- Posts: 266
- Joined: Mon Apr 02, 2012 3:56 pm
- Main scooter: Lambretta Li125 Lambretta GP20
- Location: Barrowford, Lancashire
- Contact:
Easiest bit 1st flywheel off nothing untoward there. Next step gearbox cover off but that'll have wait until tomorrow.
Out on the floor.
K.T.F.
Out on the floor.
K.T.F.
I get my kicks out on the floor.
-
Grumpy225
- registered user
- Posts: 650
- Joined: Sat Nov 24, 2012 7:59 am
- Main scooter: Gori200, rt195, ld150,rb20
- Location: Bakersfield, CA
- Contact:
Easy check.
Engage clutch and kick over. Does it lock?
While holding clutch in rotate flywheel. Does it lock?
Doing this separates the two ends of the motor and tells you were the problem is.
Engage clutch and kick over. Does it lock?
While holding clutch in rotate flywheel. Does it lock?
Doing this separates the two ends of the motor and tells you were the problem is.
-
vRSG60
- registered user
- Posts: 266
- Joined: Mon Apr 02, 2012 3:56 pm
- Main scooter: Lambretta Li125 Lambretta GP20
- Location: Barrowford, Lancashire
- Contact:
NoGrumpy225 wrote:Easy check.
Engage clutch and kick over. Does it lock?
Yes.Grumpy225 wrote: While holding clutch in rotate flywheel. Does it lock?
I get my kicks out on the floor.
-
sean brady scooters
- Dealer
- Posts: 2040
- Joined: Mon Jan 05, 2009 12:09 pm
- Location: Ripon, North Yorkshire
- Contact:
that penny is in remarkedly good condition after its journey through your motor lol
Sean Brady Scooters - 01765 690 698
-
vRSG60
- registered user
- Posts: 266
- Joined: Mon Apr 02, 2012 3:56 pm
- Main scooter: Lambretta Li125 Lambretta GP20
- Location: Barrowford, Lancashire
- Contact:
Head off barrel off. Piston will not move beyond bottom dead centre. Bore and rings OK.
Gearbox casing off everything looks OK to me.
Gearbox casing off everything looks OK to me.
I get my kicks out on the floor.
-
rosscla
- registered user
- Posts: 4823
- Joined: Tue Oct 25, 2011 9:50 pm
- Main scooter: Lambretta
- Location: Lanarkshire
- Contact:
Sounds like it's coming down to the big end then.
When you say 'won't move beyond BDC' that you cannot rotate the crank beyond that point I.e. It will not turn in a full circle?
When you say 'won't move beyond BDC' that you cannot rotate the crank beyond that point I.e. It will not turn in a full circle?
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."