Spanny for Full Bodied Series One

[Starwave]

Hello

I'm after a spanny for a series one full frame.
It's got a series 3 engine - Rapido 225, LTH reedvalve, 28mm PHBH and the gearing is Italian GP200 with 19/46 sprockets to get 4.8:1 in 4th. Currently I'm using a 48mm Clubman which works pretty well but it looks like it will finally dissolve fairly soon and I quite fancy the idea of a big can sticking out of the side.

I like the look of the SSC Taffy copy but we can't be sure it fits ok.
Under KS Fresco anyone?
Don't want to hack the rear runner but will trim a bit if necessary.
Would rather not spend more than 200 nicker but.....

Any help, suggestions or ideas gratefully received.
Cheers

[Toddy]

Hello

I'm after a spanny for a series one full frame.
It's got a series 3 engine - Rapido 225, LTH reedvalve, 28mm PHBH and the gearing is Italian GP200 with 19/46 sprockets to get 4.8:1 in 4th. Currently I'm using a 48mm Clubman which works pretty well but it looks like it will finally dissolve fairly soon and I quite fancy the idea of a big can sticking out of the side.

I like the look of the SSC Taffy copy but we can't be sure it fits ok.
Under KS Fresco anyone?
Don't want to hack the rear runner but will trim a bit if necessary.
Would rather not spend more than 200 nicker but.....

Any help, suggestions or ideas gratefully received.
Cheers

You won't get the clearance with a SSC taffy copy I tried one on my series 1 , NK and adspeed both fit as does JL3 , devtour and Franspeed as I've had all four fitted to series 1+2

Hope this helps Toddy

[DigDug]

This is a JL3 and it doesn't clear the footboard without cutting it.

[cezeta]

even the jl3 curly needed the left hand board cutting by the flywheel

[Toddy]

Sorry agree re footboards I think you will stuggle with any pipi not to have to trim but the ssc copy was fowling on the panel handle and frame leg

[corrado]

I'm fairly sure that I've got some S2 specific Franspeed pipes, I'll have a look later today. They're closer to £300 than £200 though.

[goldeneye]

one for sale on here. physcoscottcircle gadgee from ELSC.

[Starwave]

Nice one, thanks for your help chaps.
I'll pm the Mr Circle.

Cheers