Hi,
Iam currently converting the motor for my cutdown to direct air cooling, scoop under barrel etc. I have modified the mag housing and am planning on making a suitable flywheel cowl. so far so good, however i am a bit stumped as to how to fix the cowling to the mag housing.I have seen race machines with this conversion but the cowls are fixed with what looks like several jubilee clips joined together around the circumference. my question is: is there a better way of doing it? Any advice, especially with photos, would be very appreciated.
Many thanks,in advance,
Jaffa.
Direct cooling flywheel cowl
-
WINTERMODEL150
- registered user
- Posts: 436
- Joined: Sun Oct 17, 2010 5:31 pm
- Main scooter: lambretta ld auto
- Contact:
I'll put some pics of mine on here when I'm home later
Dean
Dean
-
WINTERMODEL150
- registered user
- Posts: 436
- Joined: Sun Oct 17, 2010 5:31 pm
- Main scooter: lambretta ld auto
- Contact:
This is what i come up with ,x3 m5 screws cur down so they don't rub on the flywheel
Dean
Dean
-
Terrible Taff
- Dealer
- Posts: 71
- Joined: Tue Apr 28, 2009 8:26 pm
- Main scooter: Lambretta's & Vespa's
- Location: 21 Meyricks, Coed Eva, Cwmbran, Torfaen, NP44 6TU
- Contact:
Did you make this? If you did what's the cost as this is also something I am after!WINTERMODEL150 wrote:This is what i come up with ,x3 m5 screws cur down so they don't rub on the flywheel
Dean
Is it fibreglass or spun alloy?
Cheers, Ian