A couple of Ts1 questions

[Darrell Taylor]

Ok,this is what I ended up with after modifying the side panel so I can now run an LTH air filter under the panel.





All comments welcome!!

Dean

?how many times you cracked your shin on the kick start pedal

[WINTERMODEL150]

Ok,this is what I ended up with after modifying the side panel so I can now run an LTH air filter under the panel.





All comments welcome!!

Dean

?how many times you cracked your shin on the kick start pedal

I need a big pedal what with all that compression

[clockwork]

In progress as we speak Dean?
Another idea might be a pair of wider Series 5 panels

Like the look :freak: of that mate....

[Hopey]

i use a lth manifold with a 35mm mikuni under gp panels with a cam lam sweetbreathe filter, this setup does not touch the panels and solves the fuel spitback issue, ran this for over 2k miles without problems

[nelson pk]

Great idea with the mod on the panel there!
The breathe sweet is good, i run it on a monza with a PHBH and it just touches the panel slightly.
The real problem is when you want to use the filter with a mid range fuel tank and toolbox or a long range tank. The filter then has no room.
This is why i'm removing the standard toolbox and going for a legshield toolbox on mine.
This will then give the filter plenty of room.