A couple of Ts1 questions

[AndyS]

I don't know why he wants a standard exhaust, he just does, it's not something I would choose personally really , but he has asked me to do it for him so that's what he'll get
Could it be then that you can not run a Ts1 on an SX with a filter at all,ever

[WINTERMODEL150]

I ran my ts1 for 10 years using an mb filter that sticks to the inside of the side panel with the usual issues of petrol running down the side of the bike .

Just recently i've spent some money on my engine and have been looking around at filters , I was told that lth filter would go under my panels no trouble at all ,but we're talking scooters here and I seldom believe what I'm told these days , so l put a bump in my panel for suitable clearance.

Just remember that a barrel will wear out quicker with no filter.

Dean

[WINTERMODEL150]

Hi,got an LTH filter fitted to my mikuni 35mm with an mb inlet and this is how far it sticks out.

Looks good, got any finished pics Dean?

I will put some finished pics on here for you to have a look at this week

Dean

[WINTERMODEL150]

2nd stage ...


Dean

[soulsurfer]

In progress as we speak Dean?
Another idea might be a pair of wider Series 5 panels

[WINTERMODEL150]

In progress as we speak Dean?
Another idea might be a pair of wider Series 5 panels

Thought of series 5 wide panels but it would look like one of those auto lammies , I painted the panel Friday but haven't done pics yet .

Not sure I like it though

[Diablo]

Good idea with the panel.
Whats the score with the frame in the background is that a jig its sat on?

[WINTERMODEL150]

Good idea with the panel.
Whats the score with the frame in the background is that a jig its sat on?

Yes it's a jig I've built for standard frames and auto conversations.

Dean

[WINTERMODEL150]

Ok,this is what I ended up with after modifying the side panel so I can now run an LTH air filter under the panel.





All comments welcome!!

Dean

[rosscla]

Nice, I like that and the jet door.