hi,think ime booked in for a tune this weekend with a couple of mates,after having a af 225 rapido kit go tits up then a af race crank ive now fitted a indian alloy barrel 200 kit and crank,the eng is fitted with a 30mm oko flatside carb(do you stock the jets for these?) and a reed valve manifold with a sterling exh.
The eng runs well but seems to run out of steam on banks and when opened up,plug is a nice dark brown colour after a good hard run,is there anything I can check and adj before I bring it in?
cheers mk1
pre dyno adjustments
- drunkmunkey6969
- Moderator
- Posts: 2838
- Joined: Sun Jan 04, 2009 1:42 pm
- Main scooter: '69 Lambretta GP
- Location: North Yorkshire
- Contact:
Got Kenny, Loui and Mark from M'boro coming this weekend.....which one are you?
Nothing needs adjusting as such, but the scoot does need to be in reasonable running condition before it can go on the dyno
We'll just need to have a chat on Sat before we get started about spec of machine, known existing problems and what you're hoping for etc, then we can have a look.
We carry Dellorto and Mikuni spares in stock, and if there's anything you need that we dont stock, we can discuss what you need to buy before you leave.
Dan
Nothing needs adjusting as such, but the scoot does need to be in reasonable running condition before it can go on the dyno
We'll just need to have a chat on Sat before we get started about spec of machine, known existing problems and what you're hoping for etc, then we can have a look.
We carry Dellorto and Mikuni spares in stock, and if there's anything you need that we dont stock, we can discuss what you need to buy before you leave.
Dan
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
ime Louisdrunkmunkey6969 wrote:Got Kenny, Loui and Mark from M'boro coming this weekend.....which one are you?![]()
Dan
is there anything I can check as to why it dies on hills to save on dyno time?
- sean brady scooters
- Dealer
- Posts: 2040
- Joined: Mon Jan 05, 2009 12:09 pm
- Location: Ripon, North Yorkshire
- Contact:
oko carbs................
i would,............ erm .........not rate them at all................
others may disagree of course.............?
i would,............ erm .........not rate them at all................
others may disagree of course.............?
Sean Brady Scooters - 01765 690 698
- drunkmunkey6969
- Moderator
- Posts: 2838
- Joined: Sun Jan 04, 2009 1:42 pm
- Main scooter: '69 Lambretta GP
- Location: North Yorkshire
- Contact:
I've heard from others that they are a cheap and functional carb, but can be a bit hit & miss, some batches are OK, some are not.....
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
ok,we`ll see how it goes on saterday and go from there 
- drunkmunkey6969
- Moderator
- Posts: 2838
- Joined: Sun Jan 04, 2009 1:42 pm
- Main scooter: '69 Lambretta GP
- Location: North Yorkshire
- Contact:
OK Louis, see you, the bus spotter and Frankenstein on Saturday! 
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
just like to say got the scoots dynoed today and a big thanks to the Scooterotica crew for a warm welcome,sound advice and a good service,not behind closed doors like other outfits
so get down there if yer scoot needs sorting 
- drunkmunkey6969
- Moderator
- Posts: 2838
- Joined: Sun Jan 04, 2009 1:42 pm
- Main scooter: '69 Lambretta GP
- Location: North Yorkshire
- Contact:
Cheers Louis, nice to meet you Kenny and Mark.
Give us a shout if you need owt else.
Cheers
Dan
Give us a shout if you need owt else.
Cheers
Dan
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
