Diamond TV175 piston

[ArKaTxU]

Hi.
What do you think about Diamond pistons for TV175 engine?
They have 1,5mm x 2 rings.
I have a TV cylinder in 63mm and need a rebore, but I dont want go for Suzuki 64 piston still.
Thanks!

[steve c]

diamond pistons look very poor to me !!!!!!!!!!

beedspeed have some jap pistons

[ArKaTxU]

diamond pistons look very poor to me !!!!!!!!!!

beedspeed have some jap pistons

Less than 64mm?

[steve c]

Suzuki TS185 Piston Kit 64mm
Oversizes available in .5mm graduates. 64.5mm/65mm/65.5mm/66mm

The diamond piston will break up and destroy your barrel really poor, the gudgeon pin /wrist pin looked like a piece of all thread, threaded stud

tv175 can go 66mm plus from stickies book, so a few rebores

125cc outside dimension between 3rd and 4th fin 64mm
150cc between 3rd and 4th fin 69.5mm
real tv 175cc between 3rd and 4th fin 80mm

[ArKaTxU]

OK, thanks!

[steve c]

I have recently seen newer diamond brand pistons, with 1.5mm rings looked a lot better than the ones I had seen before, like the ones in indian ally kits
?????

scooter restorations have them

[Supereibar]

I have used them in the past with good results. They are ok if you are not intending to tune the barrel to the tits

[bristolmod]

They are ok if you are not intending to tune the barrel to the tits

Whats this Jaime?......................technical term? one up from a Stage 4?

[Supereibar]

They are ok if you are not intending to tune the barrel to the tits

Whats this Jaime?......................technical term? one up from a Stage 4?

You know it!