Ron Moss - Avanti TT3 - Cylinder Kit - Review & Test.....

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
User avatar
drunkmunkey6969
Moderator
Posts: 2838
Joined: Sun Jan 04, 2009 1:42 pm
Main scooter: '69 Lambretta GP
Location: North Yorkshire
Contact:

Darrell is right, the main jet doesnt influence the results too much.....we are however concentrating on keeping the test kit rich in the mid-range, as Andy will be running in at 1/4 - 1/2 throttle (YES YOU WILL ANDY!! LOL) so we need to make sure its safe there for him.....and that does effect the readings.

Once run in, and the kit has 'loosened up' a bit, we will lean off end expect our 22bhp reading to them match Ron's figure of 24bhp. After that, we will port n tune to see what we can do with the kit, and we have every reason to believe the results will be good. ;o)
See our YouTube scooter channel for Tech-help: https://www.youtube.com/c/TheScooterFactory/videos
teamv
registered user
Posts: 67
Joined: Sat Jan 17, 2009 10:43 pm
Location: Brisbane
Contact:

Any news on how the kits going 8-)
anyone can buy a dremel, but does that make them a scooter tuner
User avatar
Andy Pickering
registered user
Posts: 2172
Joined: Sun Jan 25, 2009 10:15 pm
Main scooter: GP
Location: Hull
Contact:

teamv wrote:Any news on how the kits going 8-)
unfortunately i haven't had the time to pick it up from Seans yet and am struggling getting hold of a van to bring it back to hull, weathers awful with lots of snow at the moment here anyway..


Sent from my GT-I9000 using Tapatalk
Ricspeed, gone but never forgotten RIP my friend #59
User avatar
Muttley McLadd
registered user
Posts: 1496
Joined: Wed Jan 07, 2009 6:32 pm
Contact:

Andy Pickering wrote:weathers awful with lots of snow at the moment here anyway..
Pfft.. it's just a dusting! :bigsm:
CakeAndArseParty
User avatar
Toddy
registered user
Posts: 6327
Joined: Sun Mar 08, 2009 12:01 am
Main scooter: Lambretta Series 1
Location: East Yorkshire
Contact:

Andy Pickering wrote:
teamv wrote:Any news on how the kits going 8-)
unfortunately i haven't had the time to pick it up from Seans yet and am struggling getting hold of a van to bring it back to hull, weathers awful with lots of snow at the moment here anyway..


Sent from my GT-I9000 using Tapatalk
A van :shock: :shock: ride it :lol:
As my Dad used to say "Each to their own lad"
User avatar
Andy Pickering
registered user
Posts: 2172
Joined: Sun Jan 25, 2009 10:15 pm
Main scooter: GP
Location: Hull
Contact:

Lol don't fancy 1/4 throttle from ripon Paul :shock:

Sent from my GT-I9000 using Tapatalk
Ricspeed, gone but never forgotten RIP my friend #59
soosh
registered user
Posts: 1106
Joined: Sun May 03, 2009 2:01 pm
Main scooter: GP RS200 Iron barrel
Contact:

Andy Pickering wrote:Lol don't fancy 1/4 throttle from ripon Paul :shock:

Sent from my GT-I9000 using Tapatalk
1/4 throttle? What's up with it mate,thought it was sorted.
User avatar
Andy Pickering
registered user
Posts: 2172
Joined: Sun Jan 25, 2009 10:15 pm
Main scooter: GP
Location: Hull
Contact:

The kit comes with very strict running instructions, If the weather improves ie snow fecks off :grin: riding home will be an option, its around a 100 miles from Seans to mine so would be a good start at 1/4 to 1/2 throttle. :grin:

Sent from my GT-I9000 using Tapatalk
Ricspeed, gone but never forgotten RIP my friend #59
User avatar
les perry
registered user
Posts: 46
Joined: Wed Jan 07, 2009 7:37 pm
Main scooter: GP 230 TS1
Location: Great Harwood Nr Accrington
Contact:

Ripon to Hull 65 to 70 miles ;)
User avatar
Andy Pickering
registered user
Posts: 2172
Joined: Sun Jan 25, 2009 10:15 pm
Main scooter: GP
Location: Hull
Contact:

The garage to my drive 82 miles :grin:

Sent from my GT-I9000 using Tapatalk
Ricspeed, gone but never forgotten RIP my friend #59
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 13 guests