Vespa Street Racer / Cutdown

Post pics & videos of your scooter, projects you're working on, a lovely Vespa that you saw at a rally, or anything else scooter related.
t5pien
registered user
Posts: 7
Joined: Thu Jul 08, 2010 10:24 am
Main scooter: PX 221, SKR 172
Contact:

Engine:

- PX-200 block - Black painted
- nothing Welded
- massive inlet
- transfers and inlet polished to mirror finish
- Big boostport
- Completely ported Malossi 221 cylinder
- modified Piston
- Polini piston pin
- S & S central zylinderhead
- S & S crank 60 mm
- Timing 132/196
- Complete DRT gearbox
first gear 55 ( extralong )
second gear 41 (extralong )
third 37 ( long )
fourth gear 37 ( extrem short )
- MMW - Cosa clutch
- Primarykit 25/65
- Vespatronic ignition 17/24 with Alu fan blades
- Uncle Tom reed intake with S & S sniffer unit
- RD 350 Boyesen reeds
- Mikuni 14 l petrol pump
- S & S Exhaust - old version, many segments / no EMO
- 35 Mikuni TMX - no filter
- 57 second needle Clip, HD 310, ND 20 (probably fits quite accurately)
- Modified point 6 - choke cable at the motor
- Only SKF bearings and Torrington
- 36 + hp
- topspeed 95 mph


Suspension / Brakes / Tires

- 5 cm shortend fork
- Bitubo shock absorbers
- Rearwheel 130 / 70 / 10 Schwalbe Raceman on two wide rim cosa´s including S & S
Inner ring
- Grimeca - old version full hydraulic
- T5-rear brake mechanic
- Front 3.50 / 10 Schwalbe Paceman
- Progripp handles
- PM Pro Street lever Kit


Frame

- Frontcut
- floorboard shortened
- Backcut
- GSF-steel toolbox
- Modified repro box V50 - Rally in design
- modified Evo Sip-bench
- Ancilotti bench as alternative
- Dropbar 30 degrees
- T5-cascade
- almost completely cleaned-up frame
- Spoiler SIP
- Side stand
- Tunnel LED taillights
- frame inside is soundproofed
- Garelli front fender


Electricity, instruments and more

- two independent power circuits! (AC - only for front lights)
- Complete LED´s (turn signals, rear and brake lights, number plate light) converted except
- H4 headlights in blue (including e-approval)
- Tachometer Koso db 2
- Exhaust Temperatur Display Stage 6
- with battery

Colour : Zanussi 4

Street legal - all registered


Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
Last edited by t5pien on Sun Sep 18, 2011 10:34 am, edited 1 time in total.
User avatar
LI150
registered user
Posts: 630
Joined: Wed Jan 07, 2009 8:30 pm
Main scooter: Series 2 LI150
Location: East Yorkshire
Contact:

Well cool.. 8-)
User avatar
RICSPEED
registered user
Posts: 3334
Joined: Sun Jan 04, 2009 11:30 pm
Location: YORK

nice ...shame you are lumbered with a fridge door reg plate
Its in bits scooter club: www.facebook.com/groups/132415046859320
User avatar
Spider
registered user
Posts: 44
Joined: Sun Jan 25, 2009 10:39 am
Contact:

Love it
User avatar
RICSPEED
registered user
Posts: 3334
Joined: Sun Jan 04, 2009 11:30 pm
Location: YORK

is it yellow or green ??

or yellowie green
Its in bits scooter club: www.facebook.com/groups/132415046859320
t5pien
registered user
Posts: 7
Joined: Thu Jul 08, 2010 10:24 am
Main scooter: PX 221, SKR 172
Contact:

zanussi 4 - yellow

my friends say brimstone butterfly to my scooter
Gunny
registered user
Posts: 61
Joined: Sat Jun 06, 2009 6:17 pm
Contact:

With that much BHP how the hell do you manage to stop the engine casing weak spots stop from cracking and opening up ???
Anything i;ve had built that's over 25-26 BHP the casing turn to cheese and fall apart !! :baddevil:
t5pien
registered user
Posts: 7
Joined: Thu Jul 08, 2010 10:24 am
Main scooter: PX 221, SKR 172
Contact:

last year i made about 6000 km with this engine ( even quartermiles ) - just the original gear´s were busted - case, zylinder, crank etc. in perfekt condition.

of course i can´t give a guarantee, that this engine runs 100000 of kilosmeters
User avatar
T5-190
registered user
Posts: 573
Joined: Thu Jan 08, 2009 3:25 pm
Contact:

Nice work.
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 0 guests