what final gear ratio??

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
FREAK
registered user
Posts: 58
Joined: Tue Feb 15, 2011 1:02 pm
Main scooter: Rb225 GP LAMBRETTA
Location: gomersal
Contact:

whats the best set up for my bike finding it to die in 4rth
spec rb22 matched cases
af ballanced and welded crank
af light flywheel and bmg 120 watt stator (mag flange machiened to suit)
gp 200 gearbox 19/46 sprokets 4.8final ish
tmx 35
fat mamba (got an nk comming) which is best
ignition at 17 degrees
and ime 15.5 stone :oops: :oops:
1 st and second are mad third is long and fourth if you go into forth any slower than 65 it wont pull
any advice greatley recieved :D
User avatar
sideout
registered user
Posts: 348
Joined: Wed Jan 07, 2009 10:45 pm
Main scooter: SX150/GP Muggy/LiS3 Avanti TT3
Location: Weymouth
Contact:

The RB22 likes to rev, especially with an expansion pipe. I reckon you'd be better off with standard GP 200 gearing. ie: 18/47 sprockets which would give you 5.22 final.
You could still use your existing 82 link chain with that :)
User avatar
Muttley McLadd
registered user
Posts: 1496
Joined: Wed Jan 07, 2009 6:32 pm
Contact:

Is it ok in top above 65? If it is, I'd probably leave it as it is.
CakeAndArseParty
Post Reply Previous topicNext topic
  • Information
  • Who is online

    Users browsing this forum: No registered users and 7 guests