Mag Housing

Anything related to Lambrettas... ask tech questions, post helpful info, or just read and learn.
Post Reply Previous topicNext topic
#1GP200
registered user
Posts: 43
Joined: Wed Jan 13, 2010 10:08 pm
Contact:
Contact #1GP200

Got an Li125 casing and mag housing. Fitting a GP crank and NU2205 bearing.
Can i use the original mag housing or do i need a GP housing ?
Cheers.
Top
Robi D
registered user
Posts: 163
Joined: Thu Jan 29, 2009 9:08 pm
Location: Amherstburg, Ontario, Canada
Contact:
Contact Robi D

You should be just fine with the original. Only the ser. 1 mag housings are different.
Top
#1GP200
registered user
Posts: 43
Joined: Wed Jan 13, 2010 10:08 pm
Contact:
Contact #1GP200

Cheers Robi was hoping that was the case.
Top
User avatar
TS1-200
registered user
Posts: 297
Joined: Thu Jan 08, 2009 1:19 am
Contact:
Contact TS1-200

Don`t forget to leave out the spacer in the bearing housing, as the GP mag bearing is wider than the SX/LI one.
Keep on keepin on
Top
Post Reply Previous topicNext topic

Return to “Lambretta Tech”

  • Information

  • Who is online

    Users browsing this forum: No registered users and 3 guests

Powered by phpBB™ • Design by PlanetStyles