T5 classic front wheel

[Tosh]

when fitting the front hub is there a plain washer under the nut before you get to the circlip,in the haynes manual its shows one,on page 97 but on page 99 its not in the breakdown assembly ,so that would mean that the hub nut would go straight to the bearing an rest on the inner face,

[Chris.]

I've just split my P2 Disc, and it had hub bearing, circlip, washer, nut, castle nut, split pin.

[gaz_powell]

washers were not used in early and efl but i couldn`t voucher for disc - however i fitted a grimeca classic and a piaggio new disc hub set up and never fitted a washer to no detriment

[Tosh]

thanks both for the replys,will av to keep going with head down and see.

Paul