Scooterotica

Hi
Any one got a RB225 port map the could post up please?
Thanks

Someone must have one
Ive got a damaged rb barrel that is 72mm bore but has 2 finger ports like the rb22 not 3 like the rb25 so im trying to ascertain if its a prototype 250 0r a bored out 225
so can any one shed any light on it ?
Thanks
Russell

i,m sure dan did one a while ago...try a seach. failing that look on old forum .

Hi Sean
yes ive tried that and got the rb20 and rb25 but cant find the rb22

spigot size on RB22 is 75mm
bore is 70m,and so spigot thickness is approx 2.5mm

Well that the other odd thing the spigot is 78mm (so 3mm wall) and not stepped like the other 250s ive seen
Ive found a port map now.... and it has the same layout as a 225
I should of said..... its unused aswell with a broken spigot ?

I dropped My RB kit when i first got it and bent the spigot, but after i'd stopped screaming and crying i got out the dremel and got my mate (my hands were still shaking from dropping it) to remove the bent bit of the spigot. We did this progressively so as not to take more than we needed away.
Its been in the scooter now for around 2500klms now with no problems.

Here ya go

Thanks rossi
i had managed to find it but thanks anyway
Russ