Page 1 of 1
Serveta Jet 200
Posted: Sun Jan 25, 2009 12:48 am
by cranky
What is the largest carb I can fit to a Serveta Jet 200 keeping the standard air box and sidepanel ?
A bit silly I know - but I want to keep the scooter looking as standard as possible............
Re: Serveta Jet 200
Posted: Sun Jan 25, 2009 1:00 am
by RICSPEED
some thing like a 30mm phbh delorto but that would also depend on what tune /kit / exhaust etc
Re: Serveta Jet 200
Posted: Sun Jan 25, 2009 1:22 am
by cranky
Bog standard (for now !) - will probably want to fit an AF reverse cone , Ancillotti big bore or AF big bore pipe at a later date.
Re: Serveta Jet 200
Posted: Sun Jan 25, 2009 2:19 am
by corrado
Breathing through the airbox? I'd of thought anything above 26 mm would stuggle to get enough air?
Re: Serveta Jet 200
Posted: Sun Jan 25, 2009 11:15 am
by ArmandTanzarian
I'm not sure I'd bother to go any bigger than a 24mm. The airbox is too restictive for anything much more.
I run a Mikuni 24 with a foam airfilter; goes well, doesn't guzzle fuel and starts easily.
Re: Serveta Jet 200
Posted: Sun Jan 25, 2009 7:13 pm
by cranky
My thought exactly Corrado and after thinking about it Armand's suggestion seems more practical !