Polished Brake lever Disc Brake

[Mr Ed]

Have a black lever on my master cylinder. Anyone know anywhere that you can get chrome/ss/polished levers to replace the black lever????

[chippy]

just take it off and get that one polished or chromed, or cheap way just polish it yourself. I did it with very fine paper and then autosol metal polish

[sydduckett]

yeah agree with the above its only a coating you will be able to get it off and polish it up quite easily. Just borrowed a mates bench based polisher, its the nuts......

[cezeta]

from corrado http://www.lambrettaspareparts.com/page7.htm

[TS1-200]

Simple, strip off the coating with nitromoors paint stripper, then polish with solvol Autosol, its easier with an electric buffer tho.

[J1MS]

If you use wire wool with the paint stripper it will help remove the paint. You can use the wire wool to mildly polish the alloy as well, if its a fine grade wire wool, it can leave a fairly decent finish prior to polishing.

[cezeta]

buy the one in the picture for six pounds and do something less miserable with your time

[Mr Ed]

buy the one in the picture for six pounds and do something less miserable with your time

You're my kinda guy.

[corrado]

It's in the post. But you'll have to miss out on 4 hours of fun.

[Mr Ed]

It's in the post. But you'll have to miss out on 4 hours of fun.

Nice one. Quick work. Thanks. Didn't realise it was you. I'm kinda new here. Although with my technical and mechanical knowledge, it'll probably take me 4 hours to fit the lever.