Scooterotica

Posted: **Wed Nov 23, 2016 4:44 pm**

Not happy with the lack of thread what's my options

Sent from my SM-G903F using Tapatalk

Posted: **Wed Nov 23, 2016 5:40 pm**

Are they the longer studs you get with the wheeels if not they need fitting

Posted: **Wed Nov 23, 2016 6:00 pm**

where do you get the longer studs from

Posted: **Wed Nov 23, 2016 6:22 pm**

garry inglis wrote:Are they the longer studs you get with the wheeels if not they need fitting

You are thinking of the Lambretta version...

Sent from my iPhone using Tapatalk

Posted: **Wed Nov 23, 2016 9:37 pm**

You can buy longer studs to fit the Vespa hubs from Beedspeed & they're spot-on with the SIP tubeless rims...

Sent from my iPhone using Tapatalk

Posted: **Wed Nov 23, 2016 10:20 pm**

The 32mm ones ?

Posted: **Wed Nov 23, 2016 11:21 pm**

shocky wrote:The 32mm ones ?

Yes they're the ones - M8 x 32mm...

Posted: **Wed Nov 23, 2016 11:21 pm**

Similar problems with the Pinasco ones.

I got a bag of these:

They stick out this much when fitted:

Posted: **Wed Nov 30, 2016 8:38 pm**

Sorted with some 10.9 m8x40mm dome cap screws I may trim the 40 to 35mm
The original studs were a ball ache to get out I drilled the back out and welded a nut on 3 came out one had to be drilled right through and eventually came out with a stud extractor one sheard of flush and I had to drill it out and retap

Scooterotica

Sip rims and rear hub studs

Sip rims and rear hub studs

Re: Sip rims and rear hub studs

Re: Sip rims and rear hub studs

Re: Sip rims and rear hub studs

Re: Sip rims and rear hub studs

Re: Sip rims and rear hub studs

Re: Sip rims and rear hub studs

Re: Sip rims and rear hub studs

Re: Sip rims and rear hub studs