Building a Monza kit with a 71mm Wiseco piston 423M07100.
The piston didn't have the small end bearing when I got it.
What small end bearing do I need? The gudgeon pin is 16mm but the space between the lugs is wider then a standard Lambretta piston.
Also, where can I find a Lambretta 225 5mm base packer?
Wiseco Small end bearing
-
Fruitjuice
- registered user
- Posts: 201
- Joined: Fri Jan 09, 2009 8:26 pm
- Location: Ghent, Belgium
- Contact:
Life shouldn't be a journey to the grave with the intention of arriving safely in a pretty, well preserved body, but rather to skid in broadside, in a cloud of smoke, thoroughly used up, totally worn out, loudly proclaiming: "WOW, WHAT A RIDE"
Darrell taylor at taylor tuning google contact info
or Richard taylor on here
or Richard taylor on here
We sleep soundly in our beds because rough men stand ready in the night to visit violence on those who would do us harm
-
HxPaul
- registered user
- Posts: 1110
- Joined: Fri Dec 06, 2013 1:58 pm
- Main scooter: lambretta Li 150
- Location: Halifax,Yorkshire
- Contact:
INA do a standard Lambretta 16x20x20 small end bearing,you can get a 16x20x22 Japanese small end bearing.Fruitjuice wrote:Building a Monza kit with a 71mm Wiseco piston 423M07100.
The piston didn't have the small end bearing when I got it.
What small end bearing do I need? The gudgeon pin is 16mm but the space between the lugs is wider then a standard Lambretta piston.
Also, where can I find a Lambretta 225 5mm base packer?
-
jonashford
- registered user
- Posts: 445
- Joined: Wed Oct 20, 2010 4:47 pm
- Main scooter: Lambretta SX RB235
- Location: GRIMSBY
- Contact:
You don't normally get a small end with a piston
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk