does anyone know the thread size/pitch for the left hand thread on front/ rear hubs
changing to sip tubeless rims and forgot thet need the longer studs in.......freshly painted hubs and having a nightmare removing originals
2 out ok and two solid .am having to drill out and need to buy taps to suit
taaaaaaaa
phil
hub wheel studs thread size
-
philcasino1973
- registered user
- Posts: 91
- Joined: Mon May 05, 2014 8:57 pm
- Main scooter: lambretta gp200
- Contact:
-
gaz_powell
- registered user
- Posts: 1208
- Joined: Sat Mar 28, 2009 1:10 pm
- Location: hartlepool
- Contact:
10x1 LH is the common one but there are some 11x1 LH examples out there (not sure which manufacturers they are )
-
philcasino1973
- registered user
- Posts: 91
- Joined: Mon May 05, 2014 8:57 pm
- Main scooter: lambretta gp200
- Contact:
ta gaz its the original 63 li125 hub and is a 10mm
so its a std pitch not the fine then?
ta
phil
so its a std pitch not the fine then?
ta
phil
-
rosscla
- registered user
- Posts: 4823
- Joined: Tue Oct 25, 2011 9:50 pm
- Main scooter: Lambretta
- Location: Lanarkshire
- Contact:
Std metric coarse pitch for M10 should be 1.5mm. the hub studs are left hand M10 x 1.
You can get the tap from eBay, Chinese ones are cheap enough and adequate for the job of cleaning up threads. They take abou a week to arrive.
You can get the tap from eBay, Chinese ones are cheap enough and adequate for the job of cleaning up threads. They take abou a week to arrive.
"Our dilemma is that we hate change and love it at the same time; what we really want is for things to remain the same but get better."