Dellorto sh1/20
Posted: Tue May 05, 2015 7:46 pm
Is anyone using this carb on their series 2? Just would like to know what inlet manifold you are using?
Scooterotica
The UK's No1 Lambretta & Vespa Scooter Forum.
https://www.scooterotica.org/forum/
Dellorto sh1/20
Page 1 of 1
Re: Dellorto sh1/20
Posted: Tue May 05, 2015 10:31 pm
The inlet spacing's will be the same on all the 125/150/175 barrels so one off a SX150/TV175 S3 should be fine for your series 2 barrel . Paul
Re: Dellorto sh1/20
Posted: Wed May 06, 2015 1:31 am
Great little carbs that seem to be underestimated, best of luck with it.
Re: Dellorto sh1/20
Posted: Wed May 06, 2015 4:10 pm
Thanks guys. Need to. Source one now.
Re: Dellorto sh1/20
Posted: Wed May 06, 2015 4:50 pm
Sometimes people flog inlet manifolds on fleaby and don't list what it is size wise, the part number on my SX manifold is 19.41.1004, you may be able to snag yourself a bargain, hope this is some help. Paul 
Re: Dellorto sh1/20
Posted: Wed May 06, 2015 6:01 pm
I've got a SH1/20 fitted to my S2 and if you have extended engine mounts it can be difficult to get the carb vertical without slotting the manifold mounting holes. I may have a spare manifold at home but am not back until the weekend. I will have a look and let you know.Geocamper wrote:Thanks guys. Need to. Source one now.