PX200 PM TUNING RED FORGED MONO BILLET BRAKE CALIPER

[Hedges]

Anyone fitted one of this to PX?
The banjo bolt is at the top, do I need a different hose or banjo?
Seems awkward forcing the original to position at top?

[Norfolk Boy]

Just happened to be looking at PM tuning website, in individual pictures of calipers shows as you say banjo bolt up top, but there's a picture of one fitted and it's at the bottom same as standard caliper. Hope this helps.

[Hedges]

Yeah saw that too, I thought I fitted it wrong so took wheel off and turn it round, but it won't fit that way. Looked at the pics again and the one fitted is different to the other one with black center, which I have

[rosscla]

Are you sure it's not the bleed nipple at the top?

http://www.pmtuning.co.uk/catalog/produ ... mage/8754/

[rosscla]

It looks like in the unmounted pics you're looking at the wrong item

[Hedges]

http://www.pmtuning.co.uk/catalog/produ ... 8/id/7824/
This shows the bleed nipple and banjo the opposite way round

[rosscla]

I think those are for near side mounted disc, wrong item...

[Hedges]

Near side mounted on PX?

[Hedges]

All I see from everywhere that sell them have the pic of the one I have, can't see any pics of them fitted apart from the one with the different style, but that's the only one. I'll keep searching for some more info

[rosscla]

Near side mounted on PX?

No they've put up a picture of the wrong item on the pX listing, it's probably for something else, if you have that one they also sent you the wrong thing