Page 1 of 1
Exhaust carbon end can
Posted: Sat Apr 18, 2015 11:53 am
by JBM34
Hi guys,
I would like an exhaust end can like the one in photo for my krp3.
Is it possible ?
Any advice or feedback ?
It's for my DL 125 (GP200 engine).
Thanks.
JB
Re: Exhaust carbon end can
Posted: Sun Apr 19, 2015 11:02 am
by onthelam
Ask the man who sells them?
Re: Exhaust carbon end can
Posted: Sun Apr 19, 2015 12:04 pm
by JBM34
I've tried but no answer...
Re: Exhaust carbon end can
Posted: Sun Apr 19, 2015 3:16 pm
by Jonn
You'll have to replace the end section for one with a flat plate to attach the Taylor type silencer.These are on Franspeed type exhausts and Chiselspeed.The holes will have to line up so you might have to drill new ones.You could replace your silencer with carbon tube and reassemble it.You can get the tube from PJ engineering website.
Re: Exhaust carbon end can
Posted: Mon Apr 20, 2015 7:47 am
by JBM34
Thanks for answer !
Re: Exhaust carbon end can
Posted: Mon Apr 20, 2015 9:56 am
by onthelam
Brilliant and you could get a new end cap.
