Scooterotica

can an Li Electronic Ignition Flywheel Centre be changed to a Gp type .
i see scooter resto`s sell both, presumably the flywheels are the same . are the centers of the stator the same dims

yes - the flywheel is the same and the boss outer and holes are the same so totally interchangeable

the difference is the internal diameter (for GP or LI/SX cranks)

are you set up to drill out the old rivets etc ....if not it might be cheaper to find a 2nd hand flywheel

thanks Gaz. Im ok drilling out the old rivets, used to do it on indian points flywheels,changing the rivets to HT Studs.