Scooterotica

Posted: **Mon Jun 01, 2009 6:33 pm**

have tried to ask the seller but no replies and sale has now finished

thought it could be 66mm TS185 but compression heights on piston look all wrong and it would have a 3mm packer plate

cant be RM at 66mm

not many pistons at that size without windows

anyone have any ideas

http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0335371053

Posted: **Mon Jun 01, 2009 9:54 pm**

Looks very much like suzuki pe 250 67mm

Posted: **Mon Jun 01, 2009 10:09 pm**

Okay so 405 PE250/RM250 77-81 18mm small end what rod would he have used APE 110 or topped and tailed the barrell or spacers

do you know the compression height of this piston

regards david

Posted: **Mon Jun 01, 2009 10:27 pm**

comp height is 37mm,just popped out to the shed to check,ape rod would be best to use,1mm packer,this would make a verry strong cylinder kit.

Scooterotica

What piston was used here

What piston was used here

Re: What piston was used here

Re: What piston was used here

Re: What piston was used here