oil on crank
-
- registered user
- Posts: 231
- Joined: Sat May 09, 2009 2:31 pm
- Contact:
just started swapping the top end on my mate scoot and noticed when i turn the crank there is a film of oil coated on the webbs, is this right ? Steve
- SpanishSX200
- registered user
- Posts: 48
- Joined: Wed Mar 10, 2010 11:54 am
- Location: Beckenham, Kent
- Contact:
Steve, there will be a deposit of oil mixture left in the crank area of the case! I would say tat was ok. I think that if the bike has stood still all the oil in the mixture would run to the bottom of the case and the fuel content would evaporate, leaving a more oily mixture. Assuming it's two stroke oil of course!
Simon
Simon
-
- registered user
- Posts: 231
- Joined: Sat May 09, 2009 2:31 pm
- Contact:
thanks for that matey